Category: polyurethane grout
Dealing with Soil Subsidence can be Quick and Non Disruptive

Dealing with Soil Subsidence can be Quick and Non Disruptive
On November 18th, the Tampa Bay Times published a story entitled “Is one of Tampa Bay’s premier condo towers sinking?”. The article discusses how “very loose and very soft bay bottom soils” have caused movement of the foundation that has resulted in “significant subsidence concerns and structural design deficiencies.”
Soil Subsidence is a common problem in Florida. Florida’s sandy soils and geological conditions can cause the soils to collapse away from the surface often times leaving voids underneath foundations and surface structures. Under instances where there is overbearing weight, the support soils will become inadequate to support the structure.
First of all, it is always best to ensure that the soil compaction density is sufficient before building the…
Recent Webinar on Injectable Barriers™ is Popular Learning Opportunity
The recent webinar Ground Works hosted on Injectable Barrier Walls, titled Trenchless Applications for Restricting Groundwater and Contamination movement, provided an excellent learning opportunity for engineers, environmental consultants or for those seeking to learn more about innovative applications for subsurface barrier walls, curtain walls or for stabilizing soils for trenching.
Robert W. Moody, Jr., Ground Works’ President, presented along with Tim Harmon, P.E. with Handex/HCR. They presented three case studies presenting environmental containment and control and seepage management for dams, dikes, levees, and water control structures. Some of these presentations included the FDOT SR7 Injectable Barrier Wall, FPL Headwall Installation and the Handex Consulting and Remediation FDOT Riviera Beach subsurface contamination groundwater restriction project.
The webinar lasted for about approximately 50 minutes, however the subject matter of the webinar must have highly intrigued the audience. Mr. Moody and Mr. Harman went on to…
Trenchless Rehab Solution Lifts Box Culvert in Pensacola, Florida

Ground Works lifts a quadruple box culvert 24″ in this trenchless culvert repair project
Trenchless Technology Magazine
August 8th, 2016 by Aaron Hall
In April 2014, Florida’s panhandle experienced a historic flooding event, which was highlighted by 20 in. of rainfall in just two days. For perspective, on average, the rainfall in this area is just more than 60 in. a year.
This once-a-century event caused numerous sinkholes, portions of Interstate-10 were closed and the soils of the entire region were completely saturated for an extended period of time. As the rain waters eventually receded, a large amount of voids were created in the soil, wreaking havoc on the affected areas public works and infrastructure systems.
Jackson Lakes Box Culvert
Specifically, as a result of this storm, the Jackson Lakes box culvert in Pensacola suffered a tremendous amount…
Inflow and Infiltration Trenchless Repair
This new video highlights three projects where the URETEK polymer injection process is used to trenchlessly seal and repair lateral lines and manholes from inflow and infiltration (I/I). The application is quick and cost-effective and provides effective I/I mitigation.
Ground Works Featured in Trenchless Technology Article
In the July 2016 issue of Trenchless Technology, Ground Works Solutions’ CFO, Aaron Hall, writes about the successful rehabilitation of a box culvert in Pensacola, Florida. In the piece, Aaron discusses the problems created by historic flooding in Escambia County and how Ground Works Solutions was able to lift a box culvert structure by two feet in order to restore its long-term viability.
You can read about the scope of the project and the challenges in the article here.